Heat Transfer Material for Plotters.

Size Roll
  • 100% Secure Payment 100% Secure Payment
  • Guaranteed Delivery Guaranteed Delivery
  • Return policy certified Return policy certified

Product Description:

Polyurethane Garment Film

A Matte polyurethane material designed to be used with vinyl plotters for cutting graphics for garments. Fibron is thermal transferred with heat by a heat press on to cotton, blended fabrics, polyester fabrics, spandex and other fabrics. 100% cotton needs to be prewashed for best success. Will not adhere to nylon, dazzle cloth, shiny polyester or moisture wicking materials.
Note: Ironing on is not recommended.
Product Construction
• Film: Polyurethane
• Finish: Matte
• Thickness: 4 Mil
• Liner: Clear Mylar Carrier
• Durability: Life of the Garment
Application Recommendations
• Can be die cut and weeded with plotters.
• Note: Always Mirror Image or Reverse Cut
• Position weeded graphic on garment.
• Heat transfer graphic with heat press on to garment using FIRM HARD PRESSURE at 345-
350°F for 20 seconds.
• Deco Sparkle materials should be applied with 300°F for 10-12 seconds, Peel cold. Deco Sparkle
patterns will not layer.
• Cobra, apply 330°F for 12-15 seconds, peel cool
• Fibron can be layered, except the Neons, Deco, and Metal Flake.
• Remove Clear Mylar Carrier from garment.
• Be advised that dye migration has occurred with low energy dyes in polyester and poly-blend
• It is recommended to reheat prints 10 seconds after removing the application tape for greater
durability. Place a Teflon sheet or release liner over graphic before applying heating
* To insure greatest durability, decorated garments should always be turned inside out and washed in gentle cycle, cold water and tumble dry. Avoid use of bleach or detergents containing bleach.
Note: As with any product we recommend that all surfaces be tested for compatibility.

Here you can add custom original content(text, images, videos and more) for each product page.